FiiO Launches the All-new Flagship Hi-Res Music Player X7 Mark II

Published On

FiiO X7 All-new Flagship Hi-Res Music Player

The all-new flagship Hi-Res Music Player X7 Mark II made its debut at FiiO’s 2017 Summer Launch Event in Guangzhou, China and now makes its way into the India market. The player will be priced at MRP Rs. 54,990 and will be available for purchase at the Official FiiO India Store – www.fiio.co.in

The X7 was FiiO’s first Android-based smart music player, which made enjoying music very smart. Based on its user friendly experience, it has brought a lot of happiness to all of us. Just as the saying goes, “in the pursuit of excellence, there is no finish line”. After nearly two years of commission, now it’s time for us to say goodbye to our beloved X7 and greet its new born successor the X7 Mark II.

The main improvements of the X7 Mark II over the X7 are as follows:

  • Upgraded the RAM from 1GB to 2GB
  • Upgraded the ROM from 32GB to 64GB
  • Utilizes the flagship DAC ES9028PRO
  • Upgraded the bundled amp module from single-ended AM1 to both balanced and single-ended AM3A
  • Supports fast charging
  • Utilizes the deeply customized 5.1 OS
  • Supports Wi-Fi on both 2.4GHz and 5GHz frequency bands
  • All-new concealed micro-SD card slots

It can be concluded by its slogan, “Thoroughly Transformed, Inside and Out”!

Check out the introduction of X7 Mark II at this link: http://www.fiio.net/en/products/71

 Additionally, the introduction of the X7 Mark II can be found below:

  • Copious 2GB RAM, 64GB of internal storage, and 2 micro-SD card slots

The Fiio X7 Mark II is among the first of its kinds in Chinese portable music players to adopt 2GB of RAM, allowing it to seriously multi-task and to provide a more fluid experience. The player also comes with 64GB of internal storage and 2 micro-SD card slots, each supporting up to 256GB expansion cards. This means that the X7 Mark II is able to hold up to a whopping 576GB of music, enough for over 19,000 lossless music files, 30MB in size for each. With the X7 Mark II, you truly don’t have to worry about leaving any of your music collection behind, wherever you go.

  • Flagship DAC brings more resolution, more dynamic range, more soundstage

The Fiio X7 Mark II employs the 8-channel ESS ES9028PRO DAC. With an exceptional signal-to-noise (SNR) ratio of 129dB and a remarkable total harmonic distortion plus noise (THD + N) figure of -120dB, this DAC is able to provide more resolving power, better dynamics, and better soundstage for greatly improved sound quality over its predecessor. When combined with the ability to skip Android’s native audio re-sampling (ASRC) along with the ES9028PRO’s unique THD compensation feature and special built-in filters, the X7 Mark II ensures that your music will sound sweet and musical, just like how it is supposed to.

  • All new amp module, serving up both balanced and single-ended flavours

Bundled with the Fiio X7 Mark II is the AM3A, an all-new amplifier module with both single-ended and balanced headphone outputs. The AM3A uses the widely-acclaimed AD8620 precision, wide bandwidth JFET operational amplifier as well as the tailor-made OPA926 op-amp, which was exclusively designed for the X7 Mark II to satisfy FiiO engineers’ need for a high-performing part. Before settling on the AM3A’s final design, over the course of a year’s worth of intense internal and external testing, FiiO engineers went through three major design revisions as well as nine different PCB designs. It was only after this constant iteration that we could achieve a sound that we were truly satisfied with.

  • Three crystal oscillators for the ultimate reproduction of music

The X7 Mark II utilizes three separate crystal oscillators – one for the DSD and 44.1 kHz multiples sampling rates, and one for the 48kHz multiples sampling rates, as well as one for the 384 kHz sampling rate. Compared to the original X7, there are not only more crystal oscillators in the X7 Mark II but they also run at a faster rate. This guarantees that under all sampling rates there is radically reduced jitter, increased clock precision and stability, and overall more correct conversion from digital signals to analog.

  • Every last detail refined, all in FiiO’s distinctive design language

The Fiio X7 Mark II is of a totally new design compared to the original X7, now with design elements from its little brother the X5 3rd gen. For instance, both the side-mounted volume wheel of the X7 Mark II with its etched 45° lines and the red ring that encompasses the power button are both inspired by similar touches on the X5 3rd gen. By giving the new X7 such unique flourishes, we solidify the link between the X7 Mark II and the X5 3rd gen as being part of the same, distinctive family of FiiO players. These are only some of the many details that have been thoroughly refined on the X7 Mark II to make it an exceptional portable music player.

  • Your eyes and fingers will thank you for in-cell touch technology

The high-definition 480*800 in-cell touchscreen of the X7 Mark II is a fantastic feast for your fingers and eyes and also facilitates easy operation of the device.

  • The sky’s the limit with interchangeable amp modules

The X7 Mark II continues to adopt the highly flexible and ground breaking interchangeable amp module design introduced by its predecessor. Though the new amp modules specifically designed for the new X7 are slightly different in design, the X7 Mark II is fully compatible with the original X7’s various modules. Simply bolt on the included side mounts onto those amp modules and you are ready to listen!

  • 2 fast-charging technologies, so you can be 1 step ahead

Despite the X7 Mark II being thinner and lighter than its predecessor, it also packs a bigger, high-voltage fast-charging capable battery – now with a capacity of 3800mAh. And due to support for the popular QC2.0 and MTK PE quick-charging standards, the new X7 charges 2.7x faster than the original model. In merely the time it takes to watch a short movie (1.5 hours), you can fully top off the X7 Mark II’s generous battery.

  • In a connected era, we expect a better wireless experience

Using Wi-Fi on the new X7 Mark II is a much better experience than on the original model, due to support of Wi-Fi on both the 2.4GHz and 5GHz frequency bands. This allows for more stable, stronger signal reception strength and faster speeds. In addition, FiiO has paid special attention to the internal design to ensure that all of your wireless signals, whether it is Wi-Fi, Bluetooth, etc., will not suffer from outside electromagnetic interference. All of this means that compared to the first generation, the new X7 is much better equipped to deal with EMI.

  • True wireless freedom with dual-mode Bluetooth

The X7 Mark II is fully capable of supporting the Bluetooth 4.1 and aptX standards. Specifically, full support for Bluetooth 4.1 means the new X7 supports both the classic high-speed and BLE (Bluetooth low-energy) specifications, allowing it to pair with just about any Bluetooth device. Combine this with support for aptX and the X7 Mark II enables you to enjoy true high-resolution music without the hassles of wires.

  • Yet even more flexibility with both optical and coaxial output

On top of the coaxial output the original X7 was capable of, the new X7 can now also output optical signals, taking the X7 to new heights in its already impressive flexibility.

  • Satisfy your need for speed with a deeply-customized Android 5.1

The X7 Mark II uses a version of Android 5.1 deeply customized and optimized from the core-level up for enhanced audio playback. Compared to stock Android 5.1, the version utilized in the new X7 is much faster and much less prone to freezing and stuttering for a silky-smooth experience.

  • Advanced automatic detection of lyrics and covers

The X7 is among the first of its kind in smart high-resolution lossless audio players to incorporate automatic detection and search of music lyrics and covers. No more having to manually search and download the correct album covers and lyrics for your tunes – saving you time and hassle.

  • A UI you’ll fall in love with at first sight

Rejoice, UI lovers! The FiiO UI design team has specially created a new UI for the new X7, specifically optimized to be both stylish and functional in helping to get to your music quickly. The X7 Mark II also comes with three Android system-wide themes, which can be switched on the fly without having to restart the device. More themes created by FiiO will be available to download later on.

  • A dock turns the new X7 into a desktop master

When at the office or at home, you can attach a special decorative accessory that will allow the X7 to be docked to the K5 – giving the X7 the flexibility to be a part of a desktop audio system that truly lets you enjoy your music.

  • Custom-made accessories that don’t sacrifice function or form

Pre-applied onto every X7 Mark II is a 7H tempered glass screen protector with a 90%+ light transmittance rate. This particular screen protector is hard enough to be resistant against most scratches without compromising on how easily see-through it is. Also included with every X7 Mark II is a leatherette case with a specially-chosen mix of materials. On the outside is leather with smooth outer grains that feel luxurious to the touch and great to handle, while on the inside there is synthetic leather material that helps to protect your investment in this unit.

0 0
Bikram Singh Negi

Bikram Singh Negi

Holding camera at extreme destinations or playing games in metro train his love for tech never ends. Phones, Apps, Updates, Cameras and Tech gossip all in one roof, he’s a complete tech-package. Travelling or sampling new cuisine nothing would distort him from his passion.